beautypg.com

English – Remington Power Tools 104317 User Manual

Page 13

background image

ENGLISH

1

www.desatech.com

Figure 10 - Trigger Lockout and Trigger

Location

Trigger

Trigger

Lockout

7. Guide saw using light pressure. Do not force

saw. The motor will overload and can burn out.

It will do the job better and safer at the rate for

which it was intended.

8. Remove saw from a cut with saw running

at full speed. Stop saw by releasing trigger.

Make sure chain has stopped before setting

saw down.

9. Practice until you can maintain a steady, even

cutting rate.

warNING:

• avoid kickback. Kickback can re-

sult in severe injury or death. See

Kickback,

page 5, to avoid risk of

kickback.

• Do not fell a tree without ample skill

or expert help.

• Keep children, animals, and bystand-

ers away from area when felling a

tree.

• If two or more persons perform buck-

ing and felling operations at the same

time, provide ample distance between

operations. provide distance of at

least twice the height of tree being

felled.

FELLING a trEE

(cutting Down a tree)

warNING: when felling a tree, be

aware of your surroundings. Do not

endanger any person, strike utility lines,

or cause property damage. If tree strikes

utility lines, contact utility company at

once.

Felling is the process of cutting down a tree. Make

sure your footing is firm. Keep feet apart. Divide

your weight evenly on both feet. Follow directions

below to fell a tree.

BEForE FELLING a trEE

1. Before felling, inspect tree. Make sure there

are no dead limbs or branches that may fall

on you. Study natural lean of tree, location of

larger branches, and wind direction. This will

help you judge which way tree will fall.

2. Clear work area around tree.
3. Plan and clear a retreat path before felling.

Make retreat path opposite to planned direction

of fall of tree and at 45° angle

(see Figure 11 ).

Direction of

Fall

Retreat

Path

45°

Tree

Retreat

Path

Figure 11 - Retreat Path From Tree

4. Remove dirt, stones, loose bark, nails, staples,

and wire from tree where you will make felling

cuts.

5. Stay on uphill side when felling tree. Tree

could roll or slide downhill after falling.

This manual is related to the following products: