RCA VR538 - Manual (Page 20)

18
Playing a Tape
Operating Instructions
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or TV’s video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator lights, and the VCR
indicator lights if the Auto TV/VCR feature is set to ON. The tape automatically
begins playback if the safety tab on the cassette has been removed and the Auto
Play feature is turned on.
3. Press PLAY, if necessary. PLAY appears in the VCR’s display panel.
4. Press TRACKING up or down on the remote or CHANNEL• TRACKING up or
down on the VCR to remove any streaks from the picture, if necessary. Details
are on page 20.
5. Press STOP on the VCR or remote.
6. Press REW.
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. While rewinding, you can press POWER and the VCR will turn off
after rewinding.
7. Press EJECT on the VCR to eject the tape once it is completely rewound.
POWER EJECT
REC•XPR
PAUSE
REW
PLAY
STOP
F.FWD
POWER EJECT
REC•XPR
PAUSE
REW
PLAY
STOP
F.FWD
EJECT
Safety Tab
STOP