Remington 489 - Manual (Page 9)

Safety Precautions
7
489-34
WATER
489-33
30
489-
GASOLINE
GAS
OLINE
482-50
POW
DER
LOA
DS
3. ALWAYS use the spall shield when driving directly into concrete or steel.
ALWAYS wear eye protection.
4. NEVER use a powder actuated tool in an explosive or flammable atmosphere
or when non sparking tools are required.
POWDER LOADS AND FASTENERS
1. NEVER leave unfired powder loads on floors or work surfaces.
482-49
POW
DER
LOA
DS
482-51
2. Should the tool fail to fire, hold the muzzle firmly against the work surface for
30 seconds. Release the trigger and remove pressure on the tool while holding
the muzzle against the work surface. Again press the tool firmly against the
work surface and pull the trigger. If the tool still fails to fire, hold the tool firmly
against the work surface for another 30 seconds before unloading and carefully
discarding the misfired powder load into water or oil.
G 018 G 018
G 018 G 018
Spall
Shield
G 018