Remington 489 - Manual (Page 14)

482-71
12
Operation
1. Grasp muzzle and slide barrel forward rapidly until it stops. This sets piston into
firing position and opens the chamber.
4. Push barrel into housing to the closed position.
3. Select the proper Remington Powder Load (see Application Chart on pages 20
and 21) and insert into the chamber until it stops.
2. Insert power fastener into muzzle of tool, head end first. Push the fastener until
point is even with end of tool. ALWAYS load the fastener first, then the powder
load.
48
489-3
482-70
482-72
482-73
NOTE:
Failure to start with
the lowest power
level can result in
overdrive condition
and will result in
damage to tool
(see page 11).
489-3