RCA DECT 00023265 - Manual (Page 20)

20
Ring Volume
There are 5 volume levels and OFF for your selection. The Ring volume can
be set individually for each line.
From the Sound Settings Menu:
1. Press the
VOL (- or +) button to scroll to the Ring Volume.
2. Press SELECT soft key.
3. Use the
VOL (- or +) button to scroll to your selection and use the DIR
or CID button to toggle between L 1 and L 2. The default setting is
VOL 3.
4. Press SELECT soft key to save your selection and “ Saved” shows in the
display.
Key Tone
From the Sound Settings Menu:
1. Press the
VOL (- or +) button to scroll to the Key Tone.
2. Press SELECT soft key. Use the VOL (- or +) button to select On or Off.
3. Press SELECT soft key to save your selection and “ Saved” shows in the
display.
Answering System (only applicable for base)
1. Make sure your phone is OFF (not in Talk mode).
2. Press the MENU soft key on BS to go to the main menu.
3. Press
VOL (- or +) button to scroll to “Answer Sys.”.
4. Press SELECT soft key to confirm. You may program the following
items in base: On/Off Status, OGA Playback, OGA Record, Set OGA, Set
Office Time, Ring Delay, Message Length, Call Screening, Message Alert,
Remote Password.
On/Off Status
This is used to set the answering system On or Off for each telephone line
individually.
From the Answering System Menu:
1. Press the
VOL (- or +) button to scroll to the On/Off Status.
2. Press SELECT soft key.
3. Use the
VOL (- or +) button to select On or Off and use the DIR or CID
button to toggle between L1 and L2.
4. Press the SELECT soft key to save your selection and the status shows in
the display.
Programming the Telephone