RF-Link NL6000 - Manual (Page 37)

RF Neulink NL6000 User Guide 37
to restore parameters at this time, press ESC.
When you press Y, the system erases the current parameter file in flash
memory.
4. When the system prompts you to send the parameter file, initiate the
restore using the terminal emulator.
•
If you use Procomm, use the Send ASCII Text option.
•
If you use HyperTerminal, use the Send Text File option.
A success message appears when the restore is complete.
5. When the download is complete, cycle power to let the modem start using
the new parameter settings.
6. Press ESC to continue using the Save/Restore Parameters menu.
Restoring Default Parameters
Use the following procedure to restore factory-delivered default parameter
settings to the unit currently attached to the serial port.
1. Select Save/Restore Parameters
ä Restore Default Parameters. The
system prompts you to confirm that you want to restore the default
parameter settings.
2. Press Y to confirm that you want to restore the default settings. If you do
not want to restore default settings at this time, press ESC.
When you press Y, the system erases the parameter file in flash memory
and restores the default settings. A success message appears when the
restore is complete.
3. When the download is complete, cycle power to let the modem start using
the new parameter settings.
4. Press ESC to continue using the Save/Restore Parameters menu.