Ricoh G700 User Manual

Page 52

Taking Pic

tur
es in S

cene Mode

Using Skew Correction Mode

Select [Skew Correct Mode] in the scene mode menu and
press the MENU/OK button.

Press the shutter release button to shoot the picture.

• The display indicates that the image is being processed, and then

the area recognized as the correction range is displayed with an
orange frame. Up to five areas can be recognized.

• If the target area cannot be detected, an error message appears. The

original image remains unchanged.

• To select another correction area, move the orange frame to the

target area by pressing the $ button.

• To cancel skew correction, press the ! button. Even if you cancel

skew correction, the original image remains unchanged.

Press the MENU/OK button.

• The display indicates that the image is being corrected, and then the

corrected image is recorded. The original image remains unchanged.

Note

-------------------------------------------------------------------------------------

You can also correct the skew of a previously shot still image (GP.71).

Caution ---------------------------------------------------------------------------------

When [Skew Correct Mode] is selected, note the following:

• To shoot the subject as large as possible, position it so that the entire portion

of the subject is visible on the picture display.

• The camera may fail to recognize the subject in the following cases:

- When the image is out of focus
- When four edges of the subject are not clearly visible
- When it is hard to distinguish between the subject and background
- When the background is complicated

• Two images, one before correction and the other after correction, are

recorded. If the number of remaining shots is less than two, you cannot shoot
the subject.

• The correction area may not be detected properly if the [Date Imprint]

function is activated.