Ricoh G700 - Manual (Page 31)

29
If y
ou ar
e using the c
amer
a for the first time
, r
ead this sec
tion.
Preventing Camera Shake ---------------------------------------------------------
• Press the shutter release button gently to prevent camera shake.
• If you move the camera when pressing the shutter release button, the still
image might not come out clearly due to camera shake.
Camera shake tends to occur in the following cases:
- When shooting in a dark place without using the flash
- When using the zoom function
- When [Time Exposure] (GP.57) is selected in the shooting menu (GP.55)
• When the J symbol appears on the picture display, this indicates that
camera shake may occur. To prevent camera shake, try any of the following.
- Selecting [On] for [Camera Shake Correction] (GP.58) in the shooting menu
(GP.55)
- Setting the flash to [Auto] or [Flash On] (GP.31)
- Raising the ISO setting (GP.64)
- Using the self-timer (GP.32)
Using the Zoom Function
Press the z (Telephoto) button to zoom in
so that your subject fills more of the frame.
To zoom out and increase the area visible
in the frame, press the Z (Wide-angle)
button.
4:3 F 3 F 4:3 F 4:3 F 9999 9999 9999 9999 4:3 F 3 F 4:3 F 4:3 F 9999 9999 9999 9999
Wide-angle Telephoto
Zoom bar
Note -------------------------------------------------------------------------------------
The [Stepped Zoom] option (GP.76) in the setup menu (GP.75) allows
optical zoom to be adjusted in six discrete steps.