Connecting antennas, Appendix a: connecting the receiver, Antennas – RCA RV3693 User Manual

Page 48

Appendix A: Connecting the Receiver

FM ANT

AM ANT

300

Ω

BAL

AM Loop Antenna

FM Wire Antenna

Antennas

Extend the FM antenna to its full length and adjust it for the
best reception.

After you adjust the AM antenna, place it on a
level surface or attach it to a wall using the holes in the
antenna’s base.

This connection provides

• stereo sound from FM stations

• mono sound from AM stations

To use this connection, you
must have

• (1) FM wire antenna (included)

• (1) AM loop antenna (included)

To Connect

1. Connect the cables as shown in the

diagram below.

Using This Connection

To listen to the radio

1. Turn on the receiver.

2. Select a band (AM/FM).

3. Turn to the desired frequency.

4. Adjust the position of the antenna as needed.