RCA RV3693 - Manual (Page 11)

9
OPERATING the Receiver
To Play a Preset Station
Press the appropriate Preset Stations number. For stations 1, 2
or 3 press 0, then press 1, 2, or 3. For stations 4 through 30, press
the numbers directly.
Or, press CHAN UP to tune to the next preset station or
CHAN DOWN to tune to the previous preset station.
Preset Scanning
Use the P.SCAN (Preset Scan) button on the receiver’s front panel
to review the preset stations stored in the tuner’s memory.
Press P.SCAN. “PRESET” and the station’s location in memory
appear in the display. The tuner automatically scans all preset
stations in order, pausing at each one for approximately
4 seconds.
When the tuner reaches the station you want, press P.SCAN to
stop the scanning. If the scan is not interrupted, the tuner
reviews all preset stations in order, stopping at the point where
the scan began.