Radio Shack ET-549 - Manual (Page 8)

8
Mounting the Base
Directly on the Wall
For this mounting method, you need
two wood screws (not supplied) with
heads that fit into the keyhole slots on
the bottom of the base.
1. Drill two holes 3 15 /
16
inches apart. Then
thread a screw into
each hole, letting
the heads extend
about
5 /
16
inch from
the wall.
2. Plug one end of the supplied mod-
ular cord into the TEL LINE jack on
the back of the base.
3. Insert the supplied AC adapter’s
barrel plug into the DC IN 9V jack
on the back of the base.
4. Route the modular and adapter’s
cords through both grooves on the
bottom of the base.
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
3 15 / 16
5 / 1
5 / 1
Both
Grooves
Both
Grooves
43-1036.fm Page 8 Tuesday, August 17, 1999 9:52 AM