Radio Shack ET-549 - Manual (Page 12)

12
OPERATION
MAKING AND
RECEIVING CALLS
To make or answer a call, lift the hand-
set. Or, if the handset is away from the
cradle, press
TALK . The BATT LOW
indicator on the handset and the IN
USE indicator on the base light.
To end a call, place the handset on the
cradle or press the handset’s
TALK
button.
Note: If you press TALK to hang up
and the phone does not disconnect,
place the handset on the cradle or
press
TALK again while holding the
handset closer to the base.
CHANGING THE
CHANNEL
If you notice interference, static, or
noise during a call, you can press
CH
(channel) to find a clearer channel.
The ET-536/ET-549 changes to a dif-
ferent channel each time you press
CH .
Note: If the handset is too far from the
base, the channel might not change.
Move closer to the base and try again.
USING REDIAL
REDIAL lets you quickly dial the last
number dialed. When you hear a dial
tone, simply press
REDIAL .
43-1036.fm Page 12 Tuesday, August 17, 1999 9:52 AM