Radio Shack SYSTEM 933 - Manual (Page 19)

19
SETTING LOCAL AREA CODE
Before receiving calls, you should enter your local area code.
1. Hold down both REVIEW buttons until LOCAL AREA
CODE appears.
2. To change the first digit, press REVIEW button until the
desired digit appears. Then, press ERASE button to con-
firm.
3. Repeat step 2 for setting the second and third digits.
4. Either leave the unit alone, or press REVIEW button to
go back to the idle mode.
43-933.fm Page 19 Monday, August 16, 1999 2:59 PM