Connecting the ac adapter – Radio Shack SYSTEM 933 User Manual
Page 12
12
When
BATT
appears or the display dims, replace the batteries.
Cautions:
• Always remove old or weak batteries. Batteries can leak
chemicals that can damage your system.
• Dispose of dead batteries promptly and properly. Do not
bury or burn them.
CONNECTING THE AC ADAPTER
To power the system, plug the adapter’s barrel plug into the
9V
DC 200mA
jack on the back of the system. Then connect the
other end of the adapter to a standard AC outlet.
Caution: The supplied adapter was designed specifically for
your system. Use only the supplied adapter.
(illus)
43-933.fm Page 12 Monday, August 16, 1999 2:59 PM
See also other documents in the category Radio Shack Answer phone:
- CID-947 (28 pages)
- 240 (32 pages)
- CID-944 (6 pages)
- 43-3903 (4 pages)
- 900 MHz (32 pages)
- TAD-1005 (28 pages)
- 2902 (5 pages)
- TAD-764 (28 pages)
- 350 (32 pages)
- CID 940 (20 pages)
- CID 2905 (24 pages)
- TAD-704 (28 pages)
- CID 2903 (32 pages)
- SYSTEM 440 (32 pages)
- SYSTEM 2100 (28 pages)
- 43-3888 (20 pages)
- TAD-1027 (20 pages)
- 310 (32 pages)
- 900MHz (32 pages)
- 43.142 (28 pages)
- 43-3808 (20 pages)
- TAD 3809 (24 pages)
- TAD-277 (20 pages)
- CID-948 (4 pages)
- 2901 (5 pages)
- 43-968 (28 pages)
- SYSTEM 2000 (36 pages)
- 999 (24 pages)
- TAD-759 (24 pages)
- 43-3902 (4 pages)
- TAD-739 (24 pages)
- 1500 (20 pages)
- 420 (32 pages)
- TAD-1009 (28 pages)
- TAD-1029 (36 pages)
- 360 (40 pages)
- 200 (44 pages)
- TAD-1006 (36 pages)
- TAD-799 (24 pages)
- 43-948 (4 pages)
- TAD-716 (28 pages)
- CID-932 (24 pages)
- CID-927 (16 pages)
- 997 (36 pages)
- CID-2904 (28 pages)