The buttons on the remote control, Chapter 2 17 – RCA D30W750T User Manual

Page 19

Chapter 2

Graphics contained within this publication are for representation only.

Chapter 2: Using the Remote Control

The Buttons on the Remote Control

(0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.

To enter a one-digit channel, enter a zero first. To enter a two-digit channel,
press the two digits. To enter a three-digit channel, press and hold the 1 button
until 1 and two dashes (– –) appear, then add the second two digits. Example:
to tune to channel 123, press and hold 1 until 1– – appears, release the 1 button
and then press 2 and 3.

ANTENNA In VCR mode (if programmed), this button works as a TV/VCR
button for some VCRs. In SAT mode (if programmed), this button works as a
TV/SAT button for some satellite receivers.

Arrows Used to highlight different items in the TV menu and to adjust the
menu controls.

AUX•HD Puts the remote in AUX/HD mode. As a default, this button controls
some models of RCA HDTV Tuners. It can also be programmed to operate
some brands of an additional remote-controllable components. The Autotuning
feature for this button works only with HDTV tuners (see page 23 for more
information on Autotuning).

CC Displays a reduced Closed Captioning menu, allowing you to turn closed
captioning on and off or change the closed captioning mode. Use the up and
down arrow buttons to highlight the setting you want to change. Use the left
and right arrow buttons to change the highlighted setting.

CH + or CH - Scans up or down through the current channel list. Press once
to change the channel up or down; press and hold to continue changing
channels. In DVD mode (if programmed), these buttons work as chapter
advance or chapter reverse buttons with some DVD players.

CLEAR Removes any menu or display from the screen and returns you to
normal viewing.

DVD Puts the remote in DVD mode and, if Autotuning is enabled, will turn on
the TV and tune to the correct input channel.

FORMAT Changes the current format (aspect ratio and magnification) of the
image on the screen.
FREEZE When watching TV, freezes the picture until you press any button
on the remote to resume normal TV viewing. The FREEZE feature automatically
times out after a short time. Please note that when you "unfreeze" you go back
to live programming (skipping any programming that occurred during the
freeze).

Note: The FREEZE feature does not work on signals from the DVI-HDTV or

CMP1 inputs in progressive scan (480p) or HDTV (1080i) modes.
Do not use the Freeze feature for an extended period of time. This can cause

the image to be permanently imprinted on the picture tube. Such damage is

not covered by your warranty. Press any button to unfreeze the picture at any

time.

GO BACK Returns you to the previous channel.

GUIDE Brings up the Channel Guide menu.

Indicator

��

��

��

��

��

��

��

Continues on next page...