beautypg.com

Connections & setup, 12 chapter 1, Chapter 1 13 – RCA D30W750T User Manual

Page 15

background image

Connections & Setup

12

Chapter 1

Connections & Setup

Chapter 1

13

����

���������

�����

����

����

����������������

�������

COMPONENT INPUT Lets you connect a component video source, such as a DVD
player.

CMP1 Y PB PR (Component Video) Provides optimum picture quality because

the video is separated into three signals. Use three video-grade cables for the
connection. When using CMP1 Y PB PR, make sure to connect left and right audio
cables to the CMP1 L and R Audio Input jacks.

CMP1 L (Audio) Provides left audio connection. The left audio connector is

usually white.

CMP1 R (Audio) Provides right audio connection. The right audio connector is

usually red.

Note: Model D30W750T has an extra set of component video input jacks,

labelled CMP2.

COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD
player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.

VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2

Video) because the color part of the picture is separated from the black and white
part of the picture. When using VID1 S-VIDEO, make sure to connect left and right
audio cables to the VID1 L/MONO and R Audio Input jacks.

VID1 V (Video) Provides composite video connection. The video connector is

usually yellow.

VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a

component such as a VCR, DVD player, or laserdisc player. Their description is
the same as VID1 above.

Note: For each VID jack group (VID1 and VID2), you may connect either an S-
Video or Video cable. Do not connect both at the same time in either of the VID
jack groups.

DVI-HDTV Input Lets you connect an HDTV Tuner with a DVI output.

DVI (Digital Visual Interface) Provides an uncompressed, digital video interface

developed for high-bandwidth digital connection. It supports the overlay of high-
resolution graphics needed by some electronic program guide navigation and other
interactive services. DVI, when combined with HDCP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The DVI-
HDTV connection is designed to display either progressive scan (480p) or HDTV
(1080i) signals at a bandwidth of up to 1.78 Gigabits per second.

L (Audio) Provides left audio connection when using the DVI jack. The left audio

connector is usually white.

R (Audio) Provides right audio connection when using the DVI jack. The right

audio connector is usually red.

Note: Remember to connect the left and right audio cables because the DVI
cable carries only the picture signal, not the sound.

��������