Chapter 1: connections and setup – RCA DRS7000N User Manual
Page 8
OPTICAL
COAXIAL
DIGITAL AUDIO
COMPONENT
VIDEO OUTPUT
Y
Pb
Pr
ON
OFF
OUTPUT
INPUT
S-VIDEO
COMPOSITE
VIDEO
AUDIO
RF ANTENNA/CABLE
INPUT
G-LINK
IR SAT
L
R
L
R
PROG.
SCAN
VIDEO
L
R
INPUT1
INPUT2
S-VIDEO
Y
P
B
P
R
COMPONENT VIDEO INPUT
CABLE/ANTENNA
TV
CABLE BOX
CABLE IN
CABLE OUT
DVD RECORDER
VCR
OUT TO TV
IN FROM
ANTENNA
RF SIGNAL
SPLITTER
From Cable Line
If you have questions about using a
cable box with the Digital Media
Recorder, consult your cable company.
RCA Scenium can only provide general
instructions as cable service and cable
boxes differ in various geographic areas.
Chapter 1: Connections and Setup
6
Signal from cable or
off-air antenna
1a
1a
The back of your TV might look
different than the one pictured here.
Details about the different
kinds of cables used to
connect your Digital
Media Recorder are on
page 56.
The back of your VCR might look
different than the one pictured here.
1b
1b
1c
1c
1d
1d
3a
3a
3b
3b
3c
3c
3d
3d
1e
1e
If you connect your components as described, you must access different Video Input Channels on your TV to see
programming— whether the programming is a regular TV show, a program you saved to the Digital Media
Recorder’s hard disk drive, a videotape you’re playing in the VCR, or a disc you’re playing in the Digital Media
Recorder. If you don’t know how to access Video Input Channels on your TV, go to page 16 for help. A general
explanation, based on the connection shown above, follows:
To watch one program while you record
another:
To play a disc or a show you’ve
recorded to the Digital Media Recorder:
To play a videotape:
Tune the TV to its Input 1 channel or Vid 1 channel
Tune the Digital Media Recorder to the cable box channel (usually
channel 2, 3, or 4).
Tune the cable box to the channel you want to record.
Press the RECORD button on the Digital Media Recorder.
Use the buttons on the TV (or the TV’s remote control*) to tune to
the channel you want to watch — you won’t be able to pause live
TV because you aren’t watching TV through the Digital Media
Recorder.
Tune the TV its Input 1 channel or Vid 1 channel.
Tune the TV to the VCR input channel (usually channel 3 or 4).
If you need help finding your TV’s various Video Input Channels, go to page 16.
* The remote control packed with your Digital Media Recorder is capable of being programmed to operate many brands and
models of TVs and VCRs. For instructions, go to page 19.