Roland FP-3 - Manual (Page 37)

37
Chapter 3 Recording a Performance
Erasing Recorded Performances
You can erase recorded performances.
fig.03-04
1.
Hold down the [Song] button and press the [Rec] button.
A confirmation message appears in the display.
fig.03-05
2.
Press the [Rec] button.
The recorded performance is erased.
If you do not want to erase the performance, press the [Play] or [Song]
button.
1 2
Flashes in green Flashes in red Flashes in green
Correspondence Between Recorded Performance and
Track Buttons
A recorded performance will be assigned to the Track buttons as follows.
* You can also record to the [1] button regular keyboard performances in which
only the [1] button is specified.
Track button Performance recorded
[R]
• Rhythm (Drums Part, Chord Part) (p. 25)
• A performance of drum set tones
[1] • Lower Tone in Dual play or Split play (p. 15, p. 16)
[2]
• The performance of the entire keyboard (except drum
set tones)
• Upper Tone in Dual play or Split play (p. 15, p. 16)