Roberts Radio R876 - Manual (Page 58)

56
1. To listen to FM stereo broadcasts, tune to the required
station, plug in headphones and set the "Mono/Stereo
switch located on the left side of the radio to the
"Stereo" position. If the station being received is weak
some hiss may be audible, to reduce the hiss set the
"Mono/Stereo" switch to the "Mono" position to re-
turn to mono operation.
Note: FM stereo is only available via headphones.
2. When listening to AM (MW/LW/SW) broadcasts, the
"DX/Local" switch adjusts the radios sensitivity. If you
are listening to a strong station and the signal is dis-
torted, set the "DX/Local" switch to the "Local" posi-
tion for best reception. For normal or weak stations
set the "DX/Local" switch to the "DX" position for maxi-
mum sensitivity.
Mono/Stereo and DX/Local switch