Roberts Radio R876 - Manual (Page 14)

12
The AC adaptor supplied with this radio is an auto-switch-
ing type and will operate from either a 110volt or 230volt
AC supply.
Insert the adaptor plug into the socket marked DC IN 4.5V
on the left side of the radio. Plug the adaptor into a stand-
ard 13A mains socket outlet. Whenever the adaptor is used
the batteries are automatically disconnected.
The mains adaptor should be disconnected from the mains
supply when not in use.
We would recommend for economy that the R876 be
used via the AC adaptor wherever possible with bat-
tery operation for occasional or stand-by use only.
Using the AC adaptor