Roberts Radio R876 - Manual (Page 44)

42
This radio provides an easy to use feature called ATS
(Auto Tuning System) which operates on FM, LW and
MW bands.
1. Turn on the radio by pressing the "Power/Sleep" but-
ton.
2. Push any one of the FM/LW/MW band buttons for more
than 2 seconds. The radio will beep and the display
will flash "ATS" indicating the radio is in ATS mode.
3. The radio will then scan from the lowest frequency on
the selected waveband, automatically storing stations in
preset memory 1-9 based on signal strength order. On
FM a further 9 stations will be stored in memory page 2.
Memory page 2 is selected by pressing the "P1/P2"
button until the display shows "P2"
ATS (Auto Tuning System)