Gas fireplaces, Venting arrangements - horizontal terminations – Regency Panorama P48 User Manual
Page 6
16
2
4
6
8
10
12
14
2
0
0
12
20
6
14
43” (1092mm)
Minimum
Height
Requirement
43” (1092mm)
Minimum
Height
Requirement
4
8
10
18
16
V
ertical
Height
(Feet)
V
ertical
Height
(Feet)
Horizontal (Feet)
Horizontal (Feet)
Venting Arrangements - Horizontal
Terminations
This diagram shows all allowable combinations of vertical runs with
horizontal terminations, using one 45° and one 90° elbow (two 45º
elbows equal one 90° elbow).
Note: Must use optional fl ue adapter (Part # 770-994) when using
Rigid Pipe.
•
Maintain clearances to combustibles.
•
Horizontal vent must be supported every 3 feet.
•
Firestops are required at each fl oor level and whenever passing
through a wall.
A vent guard should be used whenever the termination is lower than the
specifi ed minimum or as per local codes.
Note: FPI Direct Vent System (Flex) is only approved for horizontal
terminations.
Please refer to Page 11 (Exterior Vent Terminations)
for additional guidelines on vent locations.
P48 Gas Fireplace
66
June 2007 Regency Product Specifi cations Book
Gas Fir
eplaces
Gas Fireplaces