Radio Shack Race Scanner - Manual (Page 29)

29
Note: You cannot use this procedure to select a car number. See
“Viewing Frequencies Associated with a Car Number” on Page 33 to
select a car number.
To manually select a channel, press MAN , enter the channel number,
then press MAN again. Or, if your scanner is scanning and stops at the
desired channel, press MAN once.
Pressing MAN additional times causes your scanner to step through the
channels. To resume scanning, press SCAN .
SCANNING CHANNELS
To begin scanning channels, press SCAN . The scanner scans through
all non-locked channels in all banks that are turned on, from the lowest
to the highest channel number. (See “Turning Memory Banks On and
Off” and “Locking Out Channels” on Page 35).
When the scanner finds a transmission, it stops on it. Two seconds af-
ter the transmission ends, the scanner resumes scanning.
Note: If SQUELCH is adjusted so you always hear a hissing sound, the
scanner does not scan properly.
DELETING A FREQUENCY FROM A
CHANNEL
1. Press PROG .
2. Enter the channel number that contains the frequency you want to
delete, then press PROG .
3. Press DEL . The frequency is deleted.
20-513.fm Page 29 Wednesday, August 4, 1999 2:39 PM