Radio Shack Race Scanner - Manual (Page 18)

18
RACE — lets you store car numbers and frequencies in the scanner’s
channels, add and delete frequencies from car numbers, display car
numbers, and listen to the channel where a car number is stored.
MAN — stops scanning and lets you directly enter a channel number or
frequency.
PROG — stores frequencies into channels.
BAND — lets you search service banks.
SCAN — scans through stored channels.
HOLD — holds a frequency search.
— turns on or off the data signal skip feature, and lets you se-
quentially recall channels where car numbers and frequencies are
stored during manual operation.
PRIORITY/H/S — sets and turns on and off priority for a particular chan-
nel. Also turns Hypersearch on and off.
L-OUT/S/S — lets you lock out a selected channel and skips a specified
frequency during a service bank, direct, or weather search.
t and s — enters the search direction (down or up).
DEL — deletes the frequencies and car numbers stored in the memory.
KEYLOCK/ — locks the keypad to prevent accidental program
changes. Also turns on the display light for 15 seconds.
Number Keys — each key is marked with a single digit, and has a
range of numbers printed above it. The single digits are used to enter a
channel or frequency. The range of numbers (31–40, for example) indi-
cates the channels that make up a memory bank.
CLEAR/ • — erases an incorrect entry or an error, and enters a decimal
point.
WX/E — selects a weather channel, and enters the frequency when you
store a frequency into a channel.
DATA
20-513.fm Page 18 Wednesday, August 4, 1999 2:39 PM