Radio Shack Race Scanner - Manual (Page 19)

19
A LOOK AT THE DISPLAY
The display has indicators that show the scanner’s current operating
status. A good look at the display will help you understand how your
scanner operates.
BANK — appears with numbers (1–10) to show which memory banks
are turned on for scanning.
Service bank indicators — appear when you select the scanner’s ser-
vice banks (see “Service Banks” on Page 21).
BATT.Lo — flashes when the batteries are low.
K/L — appears when you lock the keypad.
RACE — appears when you store car numbers and frequencies in the
scanner’s channels, add and delete frequencies from car numbers, dis-
play car numbers, and move to the channel where a car number is
stored.
PRI — appears when you set the scanner to scan the priority channels
every 2 seconds.
— appears when you turn on the data skip function.
HOLD — appears during a search hold.
WX — appears when you search the preset frequencies in the weather
band.
HYPER — appears when you are using Hypersearch during service
bank and direct search. However, HYPER disappears when the scan-
ner searches any frequency bands other than the 5 kHz step bands.
B ANK
RA CE
PRI DA TA HOLD W X HYP ER
1 2 3 4 5 6 7 8 9 10 BATT.Lo K / L
NO.
M R N
SCAN MA N PG M
M H z
L / O SEARCH
C H
P
S
DATA
20-513.fm Page 19 Wednesday, August 4, 1999 2:39 PM