RCA ANT751 - Manual (Page 4)

Step 9: Attach the antenna to the mast
IMPORTANT: Before you attach the antenna
to your mast, visit www.antennaweb.org to see
the locations of your local broadcast towers. This
information is crucial in pointing your antenna
correctly.
Loosen the nuts on the mounting clamp
U-bolt.
Point the small end of the antenna toward the
stations you want to receive.
Slide the U-bolt over the mast.
Point small end of antenna toward your local
broadcast towers. Tighten the mast clamp and
nuts securely.
Step 8: Mount the foot and pipe
Secure the foot to its permanent location.
Adjust the end of the pipe so that it is
perpendicular to the ground. Tighten the
hex nuts to hold the pipe in place.
End of the
pipe should be
perpendicular
to the ground
(plumb)