RCA MAF10BK User Manual

Lcd tv wall mount, Safety precautions, Attaching the tv mount plate

Retainer Clip

TV Mount Plate

Integrated

Bubble Level

Wall Mount Plate

Cord Management Channel

Fits TVs 13"- 27"

Maximum Load Capacity – 55 lbs. (25 kg)

Follow these precautions to ensure safe installation and

mounting of your flat panel TV.

Be sure you have purchased the correct wall mount

for your TV. Recheck the size and weight constraints.

Gather all necessary tools before you begin installation.

You will need a #3 bit Phillips screwdriver, electric

drill, drill bit (included), level (integrated level on

product), stud finder, and hammer (for brick and

concrete installations).

It is essential for the wall mount plate to be attached

to wall studs. (Use a stud finder.)

Use the included hardware for mounting purposes.

This hardware has been provided to ensure a safe and

secure mount.

Hire a licensed electrician to relocate an electrical

outlet, if needed.

Be sure to purchase wires long enough to connect

the TV to the audio and video components in your

installation.

We recommend you hire a professional installer,

if you have any concerns about installing the TV

wall mount yourself.

Keep your sales receipt to obtain warranty parts and

service and for proof of purchase. Attach it here and record

the model number. This number is located on the product.

Model No. __________________________________________

Purchase Date: ______________________________________

Dealer/Address/Phone ______________________________

Safety precautions

Thank you for choosing the RCA MAF10BK Universal

Flat Panel TV Wall Mount. This mount can be used for

all major brands of 13" - 27" flat panel TVs, 55 lbs (25 kg)

or under. Before attempting to mount your television set,

please remove all parts from this package and read the

installation instructions carefully.

Before beginning the installation process, verify that you

have all the necessary tools on hand. The following tools

are required for proper installation:

Tools

#3 bit Phillips screwdriver
Stud finder
Electric drill
Drill bit (included)
5/16" (8mm) masonry drill bit for concrete/

brick installation

Level (integrated level on product)
Allen Wrench (included)
Hammer (for concrete installations)

Package Contents
Make sure all the hardware has been included with

your mount.

(1) Drill Bit
(3) 1-7/8" Drywall Screws
(3) Concrete Anchors
(1) Allen Wrench
(4) M4x12mm Bolts
(4) M4x30mm Bolts
(4) 1/2" Spacers
(1) Phillips-Head Driver

Preparing to install

Product diagram

Attaching wall mount plate

Drywall Installation

Use a stud finder to locate a wood stud where you want

to install the mount.

NOTE:

It is required that the wall mount plate be

attached to wall studs.

Locate center of stud.

Place the wall mount plate against the wall, with the

cord management channel towards the bottom. Level it

using the bubble guide. Mark the locations on the wall

where the mount is to be installed.

Drill holes at each marked location using the enclosed

wood drill bit.

Secure the wall mount plate to the wall, using one

drywall screw, but do not completely tighten it yet.

. Using the integrated bubble level, carefully adjust the

wall mount plate until it is level.

Insert the remaining screws and tighten all three

screws completely.

Concrete/Brick Installation

Place the wall mount plate against the wall with the

cord management channel towards the bottom.

Using the integrated bubble level, mark off the position

of the holes that will be used for securing the mount.

Place the wall mount plate aside.

Using an electric drill and a 5/16" (8mm) masonry bit,

drill holes in the marked locations.

Remove any excess dust from the holes.

Insert a concrete anchor into each hole. If necessary,

use a hammer to lightly tap each anchor into place so

they are flush with the wall.

Once both anchors are in place, place the wall mount

plate back into position.

Attach the wall mount plate, using the drywall screws

provided.

Make sure all screws are tightened and secure.

Unplug your flat panel TV before starting this step of

the installation.

IMPORTANT:

NEVER lay the TV face down as this

may cause damage to the viewing surface.

Before attaching the TV mount plate to the TV,

determine which hardware to use. Examine the back of

your TV. If the back is flat, use the M4x12mm bolts. If

your TV has a recessed back, use the longer M4x30mm

bolts and 1/2" spacers.

After you have determined which bolts to use, attach

the TV mount plate to the back of your TV.

NOTE:

Be careful not to over-tighten the bolts.

Attaching the TV mount plate

To complete the installation, slide the TV mount plate

with your TV attached into the wall mount plate.

The retainer clip on the top of the wall mount plate

should click, indicating that the mount is secure.

To remove the TV, push in on the clip and slide the TV

mount plate up.

Attaching the TV mount plate

to the wall mount plate

Model:

MAF10BK

Two-piece, low-profile design

Description:

RCA Universal Flat Panel TV

Wall Mount

TV Size Range:

13" – 27"

Maximum Load:

55 lbs. (25kg)

Minimum Profile:

1.1" (2.8 cm)

VESA Compliant:

75/100

Integrated Bubble Level
Cord Management

Specifications

MAF10BK

Audiovox Electronics Corporation (the “Company”) warrants to you the

original retail purchaser of this product that should it, under normal use

and conditions, be proven defective in material or workmanship during

its lifetime while you own it, such defect(s) will be repaired or replaced (at

the Company’s option) without charge for parts and repair labor.

To obtain repair or replacement within the terms of this Warranty, the

product is to be delivered with proof of warranty coverage (e.g. dated bill

of sale), specification of defect(s), transportation prepaid, to the Company

at the address shown below. Do not return this product to the Retailer.

This Warranty does not cover product purchased, serviced or used

outside the United States or Canada.

This Warranty is not transferable and does not extend to costs incurred for

installation, removal or reinstallation of the product. This Warranty does

not apply if in the Company’s opinion, the product has been damaged

through alteration, improper installation, mishandling, misuse, neglect,

or accident.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS

WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT

PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S

LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER

FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE

SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES WHATSOEVER. No person or representative is

authorized to assume for the Company any liability other than expressed

herein in connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or consequential

damage so the above limitations or exclusions may not apply to you. This

Warranty gives you specific legal rights and you may also have other

rights which vary from state/province to state/province.

U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,

Hauppauge, New York 11788

CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,

Unit 3, Door 16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered, Marques Deposee, Marcas Registradas.

All other brands and product names are trademarks or registered

111 Congressional Blvd., Suite 350

Carmel, IN 46032

www.rca.com

MAF10BK_NA_IB_01

Limited Lifetime Warranty

WARNING: Use of this mount with a TV weighing

over 55 lbs. or with a screen larger than 27" could cause

the mount to fail causing property damage and/or

personal injury.

LCD TV Wall Mount

Installation Manual