RCA Model 21011 - Manual (Page 25)

25
D
EFAULT
As you become familiar with this system, you may prefer to use the
system’s original settings. Follow the steps below to return to the factory
default settings.
Make sure your handset or base is in menu mode. Make sure your phone
is OFF (not in TALK mode).
1. Press the cid/vol (up and down arrow) button on the handset or CID (up and
down arrow) button on the base to move the arrow to DEFAULT SETTING.
2. Use the touch tone pad on your handset or base to enter 1YES or 2NO,
or use the cid/vol (up or down arrow) button on your handset or the CID
(up or down arrow) button on your base to move the arrow to your
selection.
2NO is the default setting.
NOTE: If you choose YES all settings in the programmable menu return to the
factory default settings.
3. Press the OK soft key to save your selection, and return to the main
menu. The default setting you choose shows on the display for two
seconds.
HANDSET & BASE DISPLAY HANDSET & BASE DISPLAY
DEFAULT SETTING
LANGUAGE
EXIT OK
DEFAULT SETTING
1 YES 2NO
EXIT OK
DEFAULT SETTING
LANGUAGE
EXIT OK
DEFAULT SETTING
NO