Renesas PCA7401 - Manual (Page 11)

( 9 / 18 )
Figure 3.2 Mounting an MCU
Top view
3.3 Mounting an MCU into the Adapter
As shown in Figure 3.2, insert the No. 1 pin of an MCU into the No. 1 pin of the IC socket.
Be careful when inserting the MCU because incorrect insertion can cause fatal
damage to the MCU.
CAUTION
Caution to Be Taken for Handling an MCU:
• Do not touch the connector in the IC socket and the pins on the PROM programmer
connector. Otherwise it can cause an electrical insulation failure because of dirt.
When not using, attach the connector pins of this product to the conductive sponge
as it was shipped from the factory.