Renesas M32176T-PTC - Manual (Page 8)

(6/6)
8. Precautions
CAUTION
Cautions to Be Taken for Emulator:
z For debugging, use this product in the combination with the SDI emulator, M32170T-SDI, M32100T-SDI-E,
M32100T2-SDI-E or M32100T3-SDI-E.
z When starting up an emulator debugger (M3T-PD32R or M3T-PD32RM), select an MCU file according to the type
name and the operation mode of the MCU to be debugged. For details on the MCU file to be selected, refer to the
emulator debugger's release notes.
z When connecting to the M32170T-SDI or M32100T-SDI-E connect the both cables for connecting the emulator, the
SDI MCU control interface cable (10-pin) and the SDI trace interface cable (20-pin).
z For the precautions for the combination of the emulator, refer to the user’s manual of each emulator.
Cautions for Differences between MCUs and This Product:
z For debugging, as the M32176F4VWG (512 KB internal Flash ROM) on the M32176T-PTC is used, be careful
about the difference of the internal ROM size.
z
When the clock select switch is set to the “SOCKET” side, the oscillation occurs by itself, be careful about the
difference of the resistance and the capacitor.
z The capacitive load of the all lines of the MCU will increase depending on wirings and connectors. Use the part
whose timing is critical after checking it works properly.
Cautions to Be Taken for This Product:
z When connecting the YQPACK144SD, be sure to use the included YQ-GUIDEs.
z We cannot accept any request for repair.
z For purchasing the NQPACK144SD-ND, YQPACK144SD and HQPACK144SD contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools