Radio Shack ET-1125 User Manual
Page 17
17
Editing or Deleting
a Number in Memory
Follow these steps to edit or delete a
memory number.
1. Lift the handset.
2. Hold down
MEM
until
Memory
Store
and a list of memory loca-
tion numbers appear on the display.
3. Choose a memory location (
01
–
20
)
by pressing a number or by repeat-
edly pressing
VOL/CID
or
.
4. Press
CH/SELECT
. A menu appears
with the three options listed below.
Press
VOL/CID
or
to highlight
the desired option then press
CH/
SELECT
to choose it.
Edit
Memory
nn
— edit the
record as described in Steps 5
through 8 of “Storing a Number and
Name in Memory” on Page 16.
Delete
Memory
nn
— the display
prompts you to confirm the deletion.
Press
VOL/CID
to move the cur-
sor to
Yes
, then press
CH/SELECT
or
DELETE
. The phone beeps, and
Memory
nn
Deleted
appears.
Go
Back
— returns you to the list of
memory numbers.
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To en-
ter a 2-second pause, press
REDIAL/
PAUSE
. The display shows
P
for pause
entry. You can add more pause entries
for a longer pause.
Reviewing Memory Numbers
To review your memory numbers, press
MEM
. The list of memory location num-
bers (
01
–
20
) appears with the name
stored with each number (or
nn>
if you did not store a name).
To see the stored phone numbers, press
#/
. An arrow to the right of the number
means it is longer than 13 digits. Press
#/
again to see the rest of the number.
Repeatedly press
/ to return to the
name display.
To exit the memory number list, press
MEM
.
To see a stored name and phone num-
ber at the same time, press
CH/SELECT
when the cursor is by a memory location
number. To exit this display, hold down
DELETE
until the display clears.
Dialing a Memory Number
To dial a number stored in memory, lift
the handset and press
MEM
. The list of
memory location numbers appears.
Choose a memory location (
01
–
20
) by
pressing a number or by repeatedly
pressing
VOL/CID
or ,
then
press
TALK
.