Dab radio – Roberts Radio 63I User Manual
Page 57

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
56
DAB Radio
DAB Radio
Using DAB mode for the fi rst time
1. Carefully extend the telescopic aerial.
2. Press
the
On/Standby button to switch on the radio. If the radio has
been used before the last used mode will be selected.
3. Press
the
Radio button as needed so that DAB radio mode is selected
on the display.
4. If this is the fi rst time that DAB mode is used a quick scan of the Band III
DAB channels will be carried out. The display will show 'Scanning'. (If
the radio has been used before the last used station will be selected
instead.)
During the scanning process, as new stations are detected the station
counter will increase and the stations will be added to the list which
is stored in the radio. The bar graph indicates the progress of the
scan.
5. When scanning is completed the radio will list the stations found (in
numeric-alpha order 0....9...A...Z), unless it has previously been tuned
to a DAB station.
Press
the
Menu Up or Down buttons to scroll through the list of
available DAB radio stations.
Press
the
Select button to select the highlighted station. The display
may show 'Connecting...' while the radio re-tunes.
Use
the
Volume buttons to set the sound level as needed.
6. If the station list is still empty after the scan the display will show
'Service not available'. If no stations are found it may be necessary
to relocate your radio to a position giving better reception.
3
5
5
2
5
5
5