Roberts Radio 63I - Manual (Page 112)

111
Network profi les
Each time that you connect your radio to a WiFi network, the radio will store
the details of that connection (SSID, security key, DHCP/IP address settings)
as a profi le. Up to four such profi les are stored in the radio so that if the unit is
used in multiple locations there is no need to enter the network settings when
returning to a location previously visited.
The radios stores the four most recent profi les in memory identifi ed by their
SSID. Normally the radio will attempt to connect to one of the stored profi les
and only if it is unable to do so will you need to use the Network Wizard (see
page 18).
In the event that you visit a location only once you may wish to delete the
profi le for the network in that location to avoid losing other profi les.
1. Access the menu for the current mode by pressing and holding the
Menu button. Press the Menu Up or Down buttons until 'System settings'
is highlighted on the display. Press the Select button to enter the settings
menu.
2. Press the Menu Up or Down buttons until 'Network' is highlighted on the
display. Press the Select button to enter the Network settings menu.
3. Press the Menu Up or Down buttons until 'Network profi le' is highlighted
on the display. Press the Select button to see the stored profi les. The
profi le which is currently in use (if any) is marked with an asterisk.
4. To remove a profi le from memory, press the Menu Up or Down buttons
to highlight the profi le to be deleted and then press the Select button.
5. The radio will offer a 'YES' or 'NO' selection. Press the Menu Up or Down
buttons to select 'YES' and then press the Select button. The selected
profi le will be deleted.
Note: that it is not possible to delete a profi le which is currently in use.
1-5 1-5
1-5
1