RoyalTek REV-2000 - Manual (Page 19)

RoyalTek GPS Receiver RGM-2101/RGM-3000/REB-12R REV-2000 Operational Manual
19
Then, it will show a “TricklePower parameters”
dialog for parameters setting. There are two
parameters of Trickle power that needs to be set,
“Update Rate and On Time”. The “Update Rate”
means the navigation update frequency. For example,
“1 sec” means output once per second and “2 sec”
means output once per 2 seconds. The “On time”
means running time in the output period. For
example, “200 ms” means the running time is 200
ms per navigation update. The duty cycle of trickle
power is determined by setting of “Update Rate” and
“On Time”. For example, if the “Update Rate” is 1
sec and “On time” is 200ms, the duty cycle is
200ms/1000ms = 20%. If the “Update Rate” is 2 sec
and “On Time” is 300 ms, the duty cycle is
300ms/2000ms = 15%. The duty cycle is limited to
5% ~ 50%. Since it will do some estimation in
trickle power, please tune the proper duty cycle that
can compromise the power consumption and
acceptable navigation performance. The
“ricklePower Prameters” dialog is shown as
following picture.