RoyalTek REV-2000 User Manual
Page 18
RoyalTek GPS Receiver RGM-2101/RGM-3000/REB-12R REV-2000 Operational Manual
18
(3) Determine the update rate for each NMEA
message
(4) Select the baud rate that you want to use from
the Baud Rate pull down menu.
(5) Click the OK button to save or Cancel button to
exit
(6) It will switch to NMEA protocol.
To Synchronize Protocol
When you don’t know what the protocol/baud
rate is set , you can use this option to synchronize
protocol. Select the Action/Synchronize Protocol
and Baud Rate. It will synchronize the protocol
and Baud Rate.
To Switch Trickle Power Parameters
from SiRFDemo.exe
There are two modes of low power operation:
(1) Trickle power: In TricklePower mode, the
power to is cycled periodically, so that it
operates only a fraction of the time.
(2) Push to fix: In Push-to-Fix mode, the receiver
is generally off, but turns on frequently enough
to collect ephemeris. So that, upon user
request, a position fix can be provided quickly
after power-up.
To enable trickle power mode from SiRFdemo.exe,
please select the “Action/Set TricklePower
Parameters” like following picture.