Using the rear table – Ricoh A251 User Manual

Page 27

When you copy the following originals, set them in the Rear Table.
• Thick originals (0.19mm, 35

µ ∼

1mm).

• Originals which cannot be folded.
• Originals less than 297mm (12”) in width and more than 1200mm (47”) in length.

Notes

❐ You cannot use the following function using the Rear Table.

—

Repeated Coping

—

Semi Synchro Cut with roll paper

—

Partial Copying

1 Choose any copy setting you require.
2 For mannual copying, set paper.
3 Pull up the holder and turn in the copy exit

guide.

4 Insert the original

face down

from the Rear

Table.

5 Hold and take the original which has been

read and delivered in the front of the copier.

Using the Rear Table

SB012

SB013