RCA 5629403B - Manual (Page 21)

Unit doesn’t turn on
• Check that batteries are properly
inserted and not exhausted.
• Make sure battery compartment
door is properly closed.
• Make sure LOCK function is not
activated.
Display keeps flashing when unit
is off
• You may not have set the time.
Refer to section on Time Setting.
Cannot record
• Make sure LOCK function is not
activated.
• Make sure memory is not full.
• You have recorded 99 files in one
folder. Try record in a new folder.
Cannot show recording date and
time during playback
• You may have not set the date and
time before recording. Refer to
section ‘Time Setting’.
No sound from speaker during
playback
• Make sure volume is not set to 0.
• Headphones should not be
connected.
Cannot edit
• Make sure LOCK function is not
activated.
Cannot activate the unit after
pressing on keys
• There may be software problems.
Remove the batteries to reset the
unit.
Recordable time becomes shorter
• You may have set the recording
quality to ‘High Quality’, refer to
section ‘Setting Recording
Quality’.
Cannot perform playback
• Make sure you have selected
folder with recorded messages.
• Make sure LOCK function is not
activated.
Cannot erase recorded file(s)
• Make sure you follow each step
under section “Erasing Selected
File” carefully.
Cannot stop recording when AVR
ON
• If AVR ON sensitivity is too high
(e.g. 8 - 10), recording may not be
stopped in noisy environment.
Cannot keep the saved setting
• If the batteries are removed, saved
settings may be removed.
EN
17
Troubleshooting Tips
RP5030 EN (B ver) 15/11/06 10:28 AM Page 22