RCA 5629403B - Manual (Page 10)

Year/Date/12/24/Time Setting
With this function, you can always
read on the display the recording date
and time of your recorded messages.
Follow the steps below for time
setting.
You can still use this unit for normal
recording without setting the time.
However, no correct recording date
and time can be referred for your
recorded messages.
1. Turn on the unit.
2. Press MENU repeatedly to enter
Time setting mode.
3. When “YEAR” flashes, the digits of
the year blinks (default is 2006).
Press REVERSE or FORWARD to
increase/decrease the number, press
MENU to confirm.
4. Once the year is
entered , the digits
in the month field
will blink (default is
1). Press REVERSE or
FORWARD to
increase/decrease the number, press
MENU to confirm.
5. Once the month is
entered, the digits
in the day will
blink(while the
digits in the month
field stop blinking).
Press REVERSE or
FORWARD to increase/decrease the
number, press MENU to confirm.
6. Once the date is entered, you can
choose between 12/24 hour clock
display by pressing REVERSE
/FORWARD, then press MENU to
confirm.
7. Once the time
format is entered,
the digits in the
hour field will blink
(default setting is 12
(12 hour mode) & 0
(24 hour mode). Press REVERSE or
FORWARD to increase/decrease the
number, press MENU to confirm.
8. Once the hour field
is entered, the digits
in the minute field
will blink. Press
REVERSE or
FORWARD to
increase/decrease the number, press
MENU to confirm.
EN
6
Setting the Time
MM DD
AM
AM
Tip:
Press STOP to exit to Stop mode.
RP5030 EN (B ver) 15/11/06 10:28 AM Page 11