Radio Shack 43-3872 - Manual (Page 29)

U
s
ing Your Phone
29
From the Handset Speakerphone
1. Remove the handset from the cradle.
2. Press SPEAKER .
3. Listen for the dial tone.
4. Dial the number.
5. When the other party answers, talk into
the microphone.
From the base
1. Pick up the corded handset, or press
SPEAKER .
2. Listen for the dial tone.
3. Dial the number.
OR
1. Dial the number.
If pause is required, press REDIAL/
PAUSE .
2. Pick up the corded handset, or press
SPEAKER .
R
ECEIVING A CALL
From the handset
1. Remove the handset from the cradle.
(If AutoTalk is on, the phone will
automatically answer the call when you
pick it up.) Ô
2. Press TALK/FLASH .
OR
If the handset is off the cradle, press
TALK/
FLASH or any number. (Anykey answer is
on.)
Ô
NOTES
Ô
• The handset microphone
is located at the bottom
of the handset. Position
yourself as near to the
handset as possible and
speak clearly.
• The base microphone is
located under the base.
Position yourself as near
to the base as possible.
• To set "Autotalk", see
page 21 or to set
"Anykey Answer" see
page 22.
43-3880.book Page 29 Monday, June 28, 2004 2:07 PM