RCA TV/VCR/DVD - Manual (Page 58)

58
There are two types of source content
in pictures recorded in DVD video
discs: film content (pictures recorded
from films at 24 frames per second)
and video content (video signals
recorded at 30 frames per second).
Make this selection according to the
type of content being viewed.
NOTE:
Depending on the disc, pictures may be
cut off or doubled. In this case, select
“Video”.
1
Press DVD to select DVD mode.
Press SETUP in the stop mode
or No Disc.
Press
or to select
option.
2
Press or ENTER, then press
or to select “Picture
Mode”.
3
Press or to select your
desired picture mode.
Auto: Select this position normally.
The DVD player automatically detects source content,
film or video, of playback source, and converts that
signal in the progressive output format in an appropri-
ate method.
Film: The DVD player converts film content pictures in the
progressive output format appropriately. Suitable for
playback of film content pictures. The progressive
output feature will be most effective under this
selection.
Video: The DVD player filters video signal, and converts it in
the progressive output format appropriately.
Suitable for playback of video content pictures.
4
Press SETUP or RETURN to remove the menu screen.
Setting the Picture mode
/Enter/Setup/Return
Tv Screen
Display
Picture Mode
On
/Setup/Return
4:3
Auto
JPEG Interval Off
Tv Screen
Display
Picture Mode
On
/Setup/Return
4:3
Auto
JPEG Interval Off
5T40101A [E] (57-65) 5/9/05, 14:20 58