RCA HDLP50 - Manual (Page 54)

52 Chapter 4
Using the TV’s Menu System
Contrast Enhance Makes the picture appear brighter by deepening the black parts of the picture.
This also helps to maintain a more consistent black level from one scene to the next. The options are
On and Off.
Film 3:2 Pulldown Automatically detects video sources that were originally recorded on fi lm and
converted to a different format. Film 3:2 Pulldown modifi es the converted signal so it looks as close
as possible to the original, a process called reverse 3:2 pulldown. Film 3:2 Pulldown is applied to all
inputs. Options are:
• Advanced The default and recommended setting. Turns Film 3:2 Pulldown on when needed.
• On Used in circumstances when the TV is to be used solely with fi lm-based sources.
• Off Use this setting if you think the reverse 3:2 pulldown is causing distortions in your picture.
Reset Picture Menu button resets all Picture Menu controls to their original factory settings (except
Personal Picture Preset, Horizontal and Vertical Position, and Smoothing Adjust) for the currently tuned
input (see on-screen text). To reset the settings, you must:
1. Tune to the input you would like to reset.
2. Press MENU to access the Main Menu.
3. From the Advanced Settings menu, select Reset Controls, and then select Reset to reset the settings
for the currently tuned input.
Picture Setting
Picture Preset Mode
Go Back
2
1
0
Advanced Picture
Screen Format
4
5
3
Screen Adjust
Main Menu 4 Picture Menu
Press OK or 4 to access the Screen Adjust menu.
The Screen Adjust Menu has features that let you position
and adjust the picture on the screen:
•Horizontal Position
•Vertical Position
•Smoothing Adjust
•Auto Adjust
Screen Adjust Menu
The Screen Adjust menu allows you to position and adjust the picture on-screen. The
options are:
Horizontal Position Allows you to adjust the picture left and right. Press the right
arrow button to move the slider right and move the picture to the right. Press the left
arrow button to move the slider left and move the picture to the left.
Vertical Position Allows you to adjust the picture up and down. Press the right
arrow button to move the slider right and move the picture up. Press the left arrow
button to move the slider left and move the picture down.
Smoothing Adjust Allows you to adjust the lines of the picture so they appear
smooth. Press the left/right arrow buttons to adjust. Use the menu as your “test
pattern” when adjusting smoothness.
Auto Adjust If a device is connected to the HDMI or SVGA inputs, the Auto
Adjust menu option optimizes the on-screen position of the video. If your input has
Auto Adjust, just choose Yes.