Renesas Dummy IC M3T-SSOP36B-450 - Manual (Page 2)

(2/4)
1. Outline
The M3T-SSOP36B-450 is an accessory tool product which
connects the emulator probe and target system. Its dimensions
are the same as those of 36-pin 0.8-mm-pitch SSOP (15.0 x 8.4
mm) IC package (36P2R-A).
2. Package Components (See Figure 1)
(1) M3T-SSOP36B-450 main unit x 1
(2) Socket main unit x 1
(3) Socket frame (for 100P6S-A) x 2
(4) User’s manual (This manual) x 1
(5) User’s manual (Japanese) x 1
3. Applicable Sockets
The M3T-SSOP36B-450 has been tested with the following IC
sockets made by Matsushita Electric Works, Ltd. Be sure to use
them.
Socket main unit + socket frame (1 set):
AXS69203601
Socket frame for repair (200 pieces):
AXS69303601
4. Specifications
Table 1 Specifications
Applicable package
36P2R-A
(36-pin 0.8-mm-pitch SSOP)
Insertion/removal
iterations of connector
50 times guaranteed
5. Usage (See Figure 2)
The M3T-SSOP36B-450 can be used for debugging and
onboard evaluation in common by mounting the socket main
unit on the target board.
(1) For debugging
Mount the socket main unit on the foot pattern of the
target board. And mount the M3T-SSOP36B-450 and
socket frame on it. Then attach the connector of the
emulator.
(2) For onboard evaluation
Mount the socket main unit on the foot pattern of the
target board. Mount an MCU with on-chip flash memory
or one-time PROM on it. Then attach the socket frame on
it.
Before using the M3T-SSOP36B-450, be sure to read “8.
Precautions” on page 4.
Figure 1 Package components
Figure 2 Usage of the M3T-SSOP36B-450
M3T-SSOP36B-450
Socket
Socket frame
Emulator
M37530T-PTC
(1) Debugging (2) Onboard evaluation
MCU (SDIP) Converter board
MCU (SSOP)
: No. 1 pin
Be sure to align the pins.
(1) M3T-SSOP36B-450 main unit
(2) Socket main unit (3) Socket frame