Radio Shack Auvio 16-923 - Manual (Page 14)

26
O
p
e
ra
ti
o
n
27
O
p
e
ra
tio
n
Using Your TV in Analog Mode
n
Note: For instructions on viewing digital channels, see “Using your TV in Digital
Mode” on page 18.
1. With the TV on, press MENU to access the Digital Mode settings menu.
2. Use the joystick on your TV or   on your remote to highlight Functions and
press .
3. Go to Mode Selection, press  to highlight Analog, and press  to confirm.
Analog Mode Menu Options
Press the MENU button to enter the menu for analog mode. Use the joystick or

, , ,  on your remote control to navigate the menus. Follow the arrows to
change settings, and press  to save all
selections.
n
Notes:
„
The HOT menu, EPG, and signal strength
menu are not available in Analog mode.
„
The HOT, EPG, METER and – buttons on the
remote do not work in Analog mode.
Analog TV Functions
TV Settings 
Mode Selection  Analog 
Aspect Ratio  Auto 
Brightness  60% 
Menú Idioma  English 
Max Battery  Off 
Analog Mode Menu Options
TV Settings Press  to enter four submenus:
„
Input
Selection Select TV Air to receive over-the-air broadcast channels.
Select TV Cable to receive channels from cable companies.
„ Autoscan 1. Navigate down to Autoscan from TV Settings, and press
 to confirm.
2. Choose one of the following and press  to confirm.
„
Rescan to scan for channels and erase saved channels.
„
Update to scan for channels but keep saved channels.
3. Press  to start channel searching. Press  again to stop.
„
Channel Edit
„
Press  to add or remove a channel. * means the channel
is added.
„
Go to the Favorites column and press  to add a channel
to the Favorites list. Press FAV on the remote to cycle
through favorites list.
„
Audio
Selection Choose Mono, Stereo, or SAP. Second Audio Program (SAP)
is not available on every broadcast program. Check with your
area stations for more information.