Radio Shack Auvio 16-923 - Manual (Page 11)

20
O
p
e
ra
ti
o
n
21
O
p
e
ra
tio
n
Using the Electronic Program Guide (EPG)
The EPG gives an overview of the available programs and shows
program names, starting and ending times, and detailed information.
(Availability and amount of program details depend upon broadcasters.)
1. Select EPG from the MENU or press EPG on your remote.
2. Use   to navigate through the EPG menu. Press  to view detailed
program information.
n
Notes:
„
Time Zone must be set to get correct EPG times. See the “Functions“chart on page 22.
„
Detailed EPG information is only available for over-the-air digital broadcasts; not cable or
analog.
Setting up Functions
1. Select Functions from the MENU to enter setup for twelve submenus.
2. Use the joystick or   on your remote to navigate to the submenus.
3. Press  to enter specific settings in each submenu.
4. Use     to change settings, and press  to save.
5. Press MENU to exit.
Functions
Brightness Select desired brightness from 0% to 100%. Brightness affects
battery consumption. Dimmer settings extend battery life.
Mode Selection Select Analog, Digital, or External Input. Press  to cycle
through options, and press  to go to the selected mode.
„
Analog and Digital both allow input selection for TV Air
and TV Cable, explained below.
„
External Input does not allow for Input Selection.
Input Selection Select TV Air to receive over-the-air broadcast channels.
Select TV Cable to receive channels from cable companies.
Closed Caption Select a caption option: CS 1-6, CC 1-2, TEXT 1-2, or OFF.
Aspect Ratio Select Auto, 16:9, or 4:3.
„
Auto defaults to original broadcast format in Digital mode.
„
16:9 stretches the picture to fill the screen, sometimes
resulting in distortion.
„
4:3 shrinks the picture and adds black bars on the sides
n
Note: Pressing and holding  changes the Aspect Ratio temporarily.
When you turn the TV off, the Aspect Ratio setting will revert to the option
as last selected or used in the Function or Hot menu.