Radio Shack TRC-519 - Manual (Page 8)

8
Follow these steps to install the CB as a
base station.
1. Mount the base station antenna as
described in its owner’s manual.
Warning: Use extreme caution
when you install or remove a base
station CB antenna. If the antenna
starts to fall, let it go. It could contact
overhead power lines. If the antenna
touches a power line, contact with
the antenna, mast, cable, or guy
wires can cause electrocution and
death. Call the power company to
remove the antenna. DO NOT at-
tempt to do so yourself.
2. Connect the antenna to the ANT.
jack on the back of the CB.
3. Connect the CB’s black power wire
to the negative (–) terminal on the
DC power supply.
4. Connect the CB’s red wire (with the
in-line fuse) to the positive (+) termi-
nal on the DC power supply.
5. Connect the DC power supply to a
standard AC outlet.
To –
To + Terminal
Power
Terminal
Supply
21-1709.fm Page 8 Monday, January 29, 2001 10:29 AM