Radio Shack TRC-519 - Manual (Page 14)

14
Here are a few hints to help you reduce
or eliminate such noise:
• Make all CB power and antenna
wires as short as possible.
• Keep the power wires away from the
antenna wires.
• Be sure the chassis ground connec-
tion is secure.
• Replace old ignition wires with new,
high-voltage, noise-suppression
wires.
• Install noise suppressors on your
spark plugs, or install new spark
plugs that have built-in noise sup-
pressors.
• If problems persist, check your alter-
nator/generator and regulator
gauges. You can reduce the noise
from these sources by using bypass
capacitors at the various output volt-
age points.
Your local RadioShack store has a wide
selection of noise-suppression accesso-
ries.
21-1709.fm Page 14 Monday, January 29, 2001 10:29 AM