Radio Shack TRC-519 - Manual (Page 19)

19
REPLACING THE FUSE
The TRC-519’s 2-amp in-line fuse helps
protect your CB from power surges and
short circuits. When replacement is re-
quired, use a 2-amp, fast-acting glass
fuse, available at your local RadioShack
store.
Follow these steps to replace the fuse.
1. Make sure the vehicle and CB are
both off.
2. Hold the fuse holder at both ends,
push the ends together, twist one
end counterclockwise, and pull them
apart.
3. Remove the old fuse and inspect its
condition. If it is blown, insert a new
one of the same type and rating. If it
is not blown, reinsert it.
Caution: Do not use a fuse with rat-
ings other than those specified here.
Doing so might damage your TRC-
519.
4. Push the fuse holder ends together
and twist one end clockwise.
THE FCC WANTS YOU TO
KNOW
Your CB might cause TV or radio inter-
ference even when it is operating prop-
erly. To determine whether your CB is
causing the interference, turn off your
CB. If the interference goes away, your
CB is causing it. Try to eliminate the in-
terference by:
• moving your CB away from the re-
ceiver
• contacting your local RadioShack
store for help
If you cannot eliminate the interference,
the FCC requires that you stop using
your CB radio.
Any adjustments to a CB must be made
by a qualified technician using the prop-
er test equipment.
To be safe and sure:
• Never open your CB radio’s case.
• Never change or replace anything in
your CB radio.
21-1709.fm Page 19 Monday, January 29, 2001 10:29 AM