Renesas R8C/17 User Manual

Page 14

2.3 USB driver installation

Connect the E8 emulator using the USB cable to the USB port of host machine.

Installation procedures are described below.

If the E8 emulator is connected, it is recognized as a new hardware.

Click “Next” after selecting “Install the software automatically”.

Click “Continue”.

Microsoft has advocated authentication of the USB drivers to the USB vendors in the Microsoft®

Windows® XP and Windows®-based operating systems released after Microsoft® Windows® XP.

This is aimed at elimination of illegal drivers and improvement of security of PC.

This manual is related to the following products: