Radio Shack RT-551 - Manual (Page 13)

13
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH to answer an incoming
call without disconnecting the current
call. Press
FLASH again to return to the
first call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
TALK
FLASH
REDIAL MEMORY CHANNEL
ABC DEF
1 2 3
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Be sure T/P is set to P .
2. Press TALK .
3. When you hear the dial tone, dial
the service’s main number.
4. When you want to send tone sig-
nals, press . Any additional
numbers you dial are sent as tone
signals.
5. After you complete the call, return
the handset to the base or press
TALK . The phone automatically
resets to the pulse mode.
7 8 9
0
LOW BATT
OPER
43-1051.fm Page 13 Tuesday, August 17, 1999 1:08 PM