Roberts Radio CRD-37 User Manual

Page 29

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Sleep function

Your clock radio can be set to turn off after a preset time has elapsed.
The sleep setting can be adjusted between 0 and 90 minutes in 10 minute
increments.

1. To set the desired sleep time, press the Sleep button to enter the

sleep setup. "Sleep 90" will be displayed.

2. Repeatedly

press

the

Sleep button to adjust the sleep countdown

timer to the desired duration, ranging from 0-90 minutes in 10 minute
increments. The sleep timer will be set to the displayed time.

If the clock radio is in standby mode when the Sleep button is ﬁ rst
pressed then it will be switched on for the selected time. If the radio
is already on, then it will simply switch off after the selected time.

3. During the sleep timer countdown period, press the Sleep button

to view the remaining time as needed or to change the sleep timer
setting.

4. Your clock radio will switch off after the preset sleep time has

elapsed.

5. To cancel the sleep function and switch off the radio before the preset

time has elapsed, press the On/Off button or the Snooze button.

To cancel the sleep timer and leave the radio switched on, repeatedly
press and release the Sleep button to set the sleep timer to 0
minutes.

2,3